NetApp NS0-507 Certification Exam dumps

Passcert help you to find NetApp NS0-507 Certification Exam dumps in a real environment. If you are a beginner, and if you want to improve your professional skills, Passcert NetApp NS0-507 Certification Exam dumps will help you to achieve your desire step by step. If you have any questions about the exam, Passcert NetApp NS0-507 Certification Exam dumps will help you to solve them. Within a year, we provide free updates. Please pay more attention to our website.
Share some Network Appliance NCIE-SAN NS0-507 exam questions and answers below.
For which two vendor products would the Unified Host Utilities Kit set HBA and CAN parameters? (Choose two.) 
A. Brocade 
B. Cisco 
C. Emulex 
D. Qlogic 
Answer: C,D

Referring to the diagram shown in the exhibit, what will happen when the SAS adapter in slot 2 on Node A fails? 



A. Node A will continue to access all drives through the onboard SAS port 0a. 
B. Node A will lose all access to all drives. 
C. Node A will continue to access all drives through the Infiniband connection with Node B. 
D. Node A will shut down until SAS adapter in slot 2 is replaced. 
Answer: A

Within the NetApp Interoperability Matrix Tool (IMT), which three components are supported for the FC SAN storage host solution? (Choose three.) 
A. Host OS 
B. IP switch 
C. ONTAP OS 
D. Netapp Controller Model 
E. Host HBA 
Answer: A,C,E

You are planning a migration from a 7-mode system running Data ONTAP 7.3 to a new AFF A700 ONTAP 9.1 system. This 7-mode system provides only FC LUNs for a Windows Server 2012R2 server farm. The 7-Mode system cannot upgrade its volumes to 64-bit.In this scenario, what would you use for the migration? 
A. 7-Mode Transition Tool (7MTT) 
B. Foreign LUN Import (FLI) 
C. OnCommand System Manager 
D. Unified Host Utility Kit 
Answer: B

You have expanded your ONTAP cluster from two nodes to four nodes and want to allow Linux multipathing software to see the paths to all nodes in the cluster.In this scenario, which statement describes how to accomplish this task? 
A. Add the WWPN to the host igroup then rescan from the host. 
B. Rescan from the host OS and modify the reporting nodes to add the two new nodes. 
C. Modify the reporting nodes to add the two new nodes the rescan from the host OS. 
D. Rescan from the host OS then add the WWPN to the host igroup. 
Answer: C

You have an iSCSI host that is unable to connect to an SVM that is named “svm1” over a LIF that is named “lif1”. The home node and port of lif1 is cl01-01 port e0e. The event log show command displays the error iSCSI: network interface disabled for use; incoming connection discarded.Which command would you use to solve the problem? 
A. Broadcast-domain add-ports –broadcast-domain iscsi –ports cl01-01: e0e 
B. iSCSI interface enable –vserver svm1–lif lif1 
C. Network interface modify –vserver svm1 –lif lif1 –failover-group default 
D. Vserver iscsi create –target-alias svm1 –status-admin up –vserver svm1 
Answer: B

You have an iSCSI host that is unable to connect to an SVM that is named ¡°svm1¡± over a LIF that is named ¡°lif1¡±. The home node and port of lif1 is cl01-01 port e0e. The event log show command displays the error iSCSI: network interface disabled for use; incoming connection discarded. 
Which command would you use to solve the problem? 
A. Broadcast-domain add-ports ¨Cbroadcast-domain iscsi ¨Cports cl01-01: e0e 
B. iSCSI interface enable ¨Cvserver svm1¨Clif lif1 
C. Network interface modify ¨Cvserver svm1 ¨Clif lif1 ¨Cfailover-group default 
D. Vserver iscsi create ¨Ctarget-alias svm1 ¨Cstatus-admin up ¨Cvserver svm1 
Answer: B

According to NetApp best practices, which method should be used for zoning? 
A. Single initiator ¨C multiple targets 
B. Multiple initiator ¨C single target 
C. Single initiator ¨C single target 
D. Multiple initiator ¨C multiple targets 
Answer: C

Where do you identify the disk shelves and disks that are supported for a specific controller model? 
A. Hardware Universe (HWU) 
B. Interoperability Matrix Tool (IMT) 
C. Disk and Aggregates Power guide 
D. Installation and Setup Instructions poster 
Answer: A

You have a switch called ¡°NK5-A¡±. The switch is configured with an NP_Port. 
Which switch feature on NK5-A uses NP_Ports to allow for fabric expansion of new FC switches without having to designate additional domain IDs? 
A. NPIV 
B. NPV 
C. FCIP 
D. F_port channel trunking 
Answer: D

Network Appliance NS0-507 authentication certificate is the dream IT certificate of many people. Network Appliance certification NS0-507 exam is a examination to test the examinees' IT professional knowledge and experience, which need to master abundant IT knowledge and experience to pass. In order to grasp so much knowledge, generally, it need to spend a lot of time and energy to review many books. Passcert is a website which can help you save time and energy to rapidly and efficiently master the Network Appliance certification NS0-507 exam related knowledge. If you are interested in Passcert, you can first free download part of Passcert NetApp NS0-507 Certification Exam dumps on the Internet as a try.

There are many sites which provide information on Network Appliance NS0-507 exam and provide you NetApp NS0-507 Certification Exam dumps and others. To make a good preparation for this highly professional exam you must have a complete knowledge and for that you must use an authentic source. Passcert is the best source to prepare for your Network Appliance NS0-507 exam for 100 percent results.